NEWS
HOME > NEWS > DETAILS

Installation-(Pictures Display) Of Led Flashing Light & Lightbar (Traffic Signals Lights) For Police

author:senken time:2021-07-22 10:21:43

 

<1> What is the use of warning lights in these situations?

 

For example, for construction units, warning lights should be turned on during road construction, especially in the case of unknown road conditions at night. It is easy to cause some accidents. Unfamiliar people are easy to trip and fall.

Causes traffic congestion, so it is very necessary and necessary to set up warning lights, which play a warning role.

 

Secondly, it is the same for cars driving on roads, and occasionally appearing during long-term driving-some problems are very common. In the case of having to park on the road, in order to ensure safety, the driver needs to place the vehicle dangerously in Fujian. Warning lights to remind passing vehicles to notice new obstacles ahead, slow down and drive safely. Warning lights with good performance can expand the visual range of hazard warning models, allowing other driver groups to see this reminder more clearly. So try to use warning lights with good performance.

 

In addition, when security guards are patrolling fixed security posts and police motorcycles, when criminals want to commit illegal incidents, they will be affected and prevent illegal actions. People who are injured can seek help in time, and a wider range of criminals will be affected. The role of warning and restraint can effectively control and reduce crimes and maintain social stability. LED strobe lights are installed in the community and on the sidewalks. You can see it with more attention and better protection.Yourself and your family.

 

Of course, it is no exception for those who like to travel by bicycle. If you want to make it easier on the way, or if the tire is flat, you will have to stop. At this time, it is very dangerous to stop in a bend, and it is easy to cause a traffic accident. So this kind of more convenient LED warning light plays a key role. Moreover, it is not only the role of roadside warning, but also can be used as a lock when necessary.

 

<2> Warning light power

 

1. Short row of LED warning lights: 48-70W

2. Long row of rotating warning lights 1000-2000: 1000 model: 210W, 2000 model: 210W

3. Long row rotating warning lights 3000-4000: 3000 model: 280W, 4000 model: 280W

4. Long row rotating warning lights 6000-8000: 6000 model: 290W, 7000 model: 70W, 8000 model 380W

5. Long row burst flashing warning light 1000-8000: 1000 model: 230W, 2000 model: 230W: 3000 model: 265W:

4000 Model: 160W: 5000 Model: 165W: 6000 Model: 240W: 7000 Model: 100W: 8000 Model: 260W

6. Long row of LED warning lights 1000-8000: 1000 Model: 100W: 2000 Model 80W: 3000 Model: 150W: 4000 Model 150W: 5000 Model: 170W: 6000 Model: 210W: 7000 Model 80W: 8000 Model 280W

4. How to install the warning lights

Warning lamps can be divided into: long rows of warning lights, short rows of warning lights, and ceiling warning lights according to different purposes and sizes. Let's describe the installation method of these warning lights in detail below.

1. Installation of long row of police lights

The long row of lights is composed of a long row of lights, light legs, hooks, small pieces of hooks and fixing screws. The specific installation is as follows:

Led lightbar


 


bracket.png

 


(Lamp leg

 

 hook.png


(Draw hook, small pieces of draw hook)

screws.png 


(fixing screws)

 

1. When installing, first place the long row of warning lights at a suitable position on the roof of the car.

2. Remove the hook screw from the lamp leg for subsequent installation.

3. Take out the hook, the small parts of the hook, the fixing screws, etc., select the appropriate fixing holes on the hook, and fix the small parts and the hook with screws.  

 

Pass the hook screw through the small part of the hook and connect it to the corresponding nut of the lamp leg. At the same time, adjust the hooks on both sides to a proper state, and then tighten the hook screws alternately.   

 

Route the control line of the long row of warning lights along the door sealing groove to the driver's side. Take out the controller, and connect the controller interface and the long row of warning lights control line interface correspondingly.

Connect the matched DC voltage to the positive and negative poles of the power supply. The red is the positive pole of the DC power supply, and the black is the negative pole of the DC power supply.

 

<1> Installation of short row of warning lights

 

The fixing methods of the short row of lights are divided into bottom screws, iron sleeves, tripods, and suction cups.

 

When the short row of warning lights are used for guards at the guard post, it is better to fix them with the bottom screws to increase the stability.

 

2. It is suitable to be fixed with iron sleeves at the construction junctions. The warning effect is good, which can reduce the damage to the lamp body and prolong the service life.

 

3. In the construction site, the tripod is easy to carry and install, and has strong mobility.

 

Suction cups can be used on the roof and sentry boxes, and the two strong magnet disks have anti-scratch protective films, which can reduce collisions and increase safety.

 

Different types of short row warning lights have different fixing and installation methods, and different installation methods will show different effects.

 

<2> Ceiling lamp installation

 

The fixing methods of the small police lights on the car roof are divided into screw fixing and magnetic fixing.

 

1. Screw fixation can increase the stability of the roof warning lights, wind resistance, and collision resistance. It is suitable for large engineering vehicles such as engineering vehicles and snow plows, and is convenient for walking on rugged and bumpy roads.

 

2. It is simple and convenient to install by magnetic suction. It is directly fixed by the suction cup at the bottom of the police light, and it is not easy to damage the body. It is suitable for the installation of small cars or sanitation vehicles.

 

There are different installation methods according to different models, and the display effect after installation is also different, and the best fit is the best.

<3> The fixing methods of the small police lights on the car roof are divided into screw fixing and magnetic fixing.

 

1. Screw fixation can increase the stability of the roof warning lights, wind resistance, and collision resistance. It is suitable for large construction vehicles such as construction vehicles and snow plows, and is convenient for walking on rugged and bumpy roads. 

 

It is simple and convenient to install by magnetic suction. It is directly fixed by the suction cup at the bottom of the police light, and it is not easy to damage the body. It is suitable for the installation of small cars or sanitation vehicles.

 

There are different installation methods according to different models, and the display effect after installation is also different, and the best fit is the best.

The following figure shows a method of installing a led police warning lights (lightbar)

1. preparation

<1> Determine the product structure: police lights, host, hook, handle

senken.png

<2> Before installing the warning lights, first attach the hook, which refers to the length and width of the vehicle, and install it in a suitable position

SENKEN ..png



<3> The light legs of the police light can be adjusted according to the width of the car.

 3NRP`~(YPI`HO8YG%X4]MM2.png


<4> Install the hook here

4..png

<5> The lamp legs can be adjusted and moved by screws, only to the suitable position

5..png

<6> Install the pull hook on the warning light, pay attention to the installation method

6..png



2. The second step is to install the warning lights

<1> Place the light on the roof with legs down

1..png

<2> The hook is fixed to the edge of the car (above the front door)

2..png


<3> If the angle is not suitable, use tools to adjust the shape

3..png

<4> In the lower round hole, riveted with rivets

4...png

<5> If the pull hook is too long, the lamp leg can be moved to the inside, Or adjust the position of the hook screw and fix it properly

 

5...png

<6> The other side was fixed in the same way

6...png

,<7> Details: the middle horn of the police light should be aligned with the center of the car

7...png

<8> The police light wire should be installed in the car's sealing strip

8...png

<9> In addition to the power supply, link the host and the handle

9...png

<10> The warning light is 12v, the black wire is connected to the negative "-", and the red wire is connected to the positive "+". Connected to the power supply inside the car or under the front hood of the car

10...png

3. The third step is to connect the police light wire to the front power supply. For safety, connect a connector to the head of the wire

<1> The positive pole is connected to the power supply, the negative pole is connected to the negative pole,

11..png

<2> It’s better to install a fuse or fuse on the positive pole, which is safer

12.png

<3> After the installation is complete, the warning lights can be used normally

13.png